Bekijk TAMS-Elektronik 53-02187-01 in modelspoor elektronica en vergelijk alle specificaties en prijzen op allemodelspoor.nl

TAMS-Elektronik 53-02187-01 LC box 18 vehicle lighting

Proper vehicle lighting

- Number of outputs: 5 (each 100 mA max. Current)
- for the connection of lamps or LEDs (via additional series resistors)

Connection of power supply and consumers:

- LC box: via PCB sockets and mini banana plugs (banana plug not included)

Via the switching input, the programs "moving vehicle" (with open switching input) or "stationary vehicle" (when connecting the switching input to ground) are set. Assignment of the outputs:
1: turn signal on the left
2: turn signal on the right
3: Interior lighting (stationary vehicle) or horn (moving vehicle)
4: light in front
5: Rear light / brake lights

Program "moving vehicle":
The lights front and rear are always on. A speaker can be connected to output 3 (not included in delivery), the volume can be reduced via a series resistor (about 10 ohms to 1 kOhm). The turn signals left and right, the horn and the brake lights are switched on and off randomly. After the brake lights come on, the headlight is switched on, then the brake lights and a little later the headlights are switched off.

Program "stationary vehicle":
The lights in front and behind are mostly switched on. Every now and then the turn signals on the left and right, the hazard warning lights and the interior lights are switched on. After the interior lighting has been switched on, first the lights go out front and behind, then the interior lighting. Then the lighting remains switched off for a while.