Bekijk Fleischmann Multimaus-allein in modelspoor digitaal en vergelijk alle specificaties en prijzen op allemodelspoor.nl

Remaining stock from the starter pack at a great price while supplies last! The hand controller normally costs €119.90.

Scope of delivery:
- Multimouse with current software
- Connection cable
To operate it you need either a Z21, z21, z21Start or the transformer 681301 and the connection box/amplifier 680801!

An affordable controller with a wide range of options. Multiple multi-mice devices can be operated simultaneously on the system.
Display with adjustable brightness.

Compatible with the old Lokmaus® 2 system.

Up to 9,999 locomotive addresses can be controlled by direct input; 64 of these can be stored in a database and assigned names: e.g., 103RB (103 red-beige). Up to 21 functions (including headlights) can be activated per locomotive if the locomotive has been appropriately equipped.
The locomotives can be operated with 14, 28 and 128 speed steps. This can be defined in principle, but can be changed for each locomotive as required.

You can program your locomotive decoders using two different programming methods
Set it according to your own preferences: The most important CV values 1 to 5 can be accessed directly via the key combination "Menu" and 1-5. The maximum of 255 possible CV values can be accessed via the programming menu. Of course, depending on the decoder design, all values up to 255 can be programmed.

Switch mode:
The multiMAUS can control up to 1024 magnetic accessories! These elements must be equipped with an electric drive and connected to a magnetic accessory decoder. The magnetic accessory decoders are then programmed electronically via the tracks.