KaModel n.DT2-N
Drilling device for laying flex track N Peco SL-300
n.DT2/N, drilling device KaModel for laying flex tracks N Peco SL-300
With this special device, every model builder can accurately and precisely pre-drill the sleepers and the substructure for later screwing the tracks together.
It is also suitable for pre-drilled sleepers; simply fit and drill down to the floor.
No more dealing with holes, etc., which many model makers are familiar with. The device is addictive and makes your work much easier.
The quality and accuracy of the fittings will also be high with this device.
It can also be used in combination with track templates.
The product is made of high-quality steel and hardened to high hardness, so that repeated drilling does not wear out the guide hole.
When using countersunk screws, the screws can be completely countersunk into the threshold, leaving no protrusion at all. Please refer to the instructions for the exact procedure.
drilling device
For drills with a diameter of 0.9 mm and 1.8 mm
Screws with a diameter of 1mm from our range are suitable for the device
The package contains:
- Drilling device
- Small drill
- Large drill with stop
- Allen key for stop
- Directions
Beste prijs uit voorraad: €28.80